Adding a usb passive hub between intona and dacs

Using USB isolation for audio
Post Reply
dericchan1
Posts: 5
Joined: April 12th, 2022, 6:44 pm

Adding a usb passive hub between intona and dacs

Post by dericchan1 »

Hi Daniel, I would like to know if this will have any negative impact on the isolation?

I plan to connect a streamer usb out to the intona, then from intona out to an Anker certified passive usb hub with 4 ports. Each of the 4 ports will be connected to a different usb DAC then to my preamplifier. Obviously I will only be playing music from my streamer to 1 dac at a time but would like to know if you see any issue with using a usb hub to connect multiple dacs at the same time?

Thanks

Deric

Daniel (Intona)
Posts: 113
Joined: May 6th, 2020, 8:29 am

Re: Adding a usb passive hub between intona and dacs

Post by Daniel (Intona) »

Go ahead, I don't see any problem with that.
Daniel (Intona)

dericchan1
Posts: 5
Joined: April 12th, 2022, 6:44 pm

Re: Adding a usb passive hub between intona and dacs

Post by dericchan1 »

Daniel (Intona) wrote: August 2nd, 2023, 3:25 pm Go ahead, I don't see any problem with that.
Thanks Daniel, much appreciated!!!

Post Reply